Finished string art ornaments on wood slices shaped like a tree, star and heart

String Art Ornaments: 7 Stunning Ideas You Will Love

String art ornaments are made by hammering small nails into a wood slice in the outline of a shape, then wrapping embroidery floss from nail to nail until a tree, star or heart appears. Expect about 20 to 40 minutes per ornament, roughly $1 to $2.50 each, and a beginner-friendly difficulty. This guide gives you the supplies, nail layouts and fixes you need to succeed on the first try.

Table of Contents

The nails are only anchor points for the thread. They do not hold the ornament together or attach it to the tree, so the whole design depends on accurate nail placement. That is why the template method below matters more than any other step.

Why String Art Ornaments Beat Painted Wood Slices

Painted wood slice Christmas ornaments are lovely, but paint can look flat or messy if your brush control is shaky. Thread gives you crisp lines, texture and a bit of dimension, and mistakes are easy to unwind and redo. The bark edge and visible grain stay front and center, which is the rustic look most people want from wood slice Christmas decorations DIY projects.

Finished string art ornaments on wood slices shaped like a tree, star and heart
Photo : Antique piano — prague.czech.photo (BY 2.0)

The craft also scales well. Once you have a template, you can repeat the same shape a dozen times for a party, a classroom or a gift exchange.

String Art Supplies List With US Price Ranges

This string art supplies list uses items from Michaels, Hobby Lobby, Walmart, Amazon and home improvement stores. Prices are rough ranges and vary by region and sales.

ItemWhat to buyTypical US price
Wood slices3 to 4 in wide, at least 1/2 in thick, bark on$8 to $20 for a pack of 10 to 25
Nails3/4 in brad nails or small finishing nails$3 to $6 per box
Embroidery floss6-strand skeins in red, green, white, gold$0.50 to $2 per skein
HammerLight claw hammer, 8 to 16 oz$8 to $20 (often already owned)
Needle-nose pliersFor holding nails and pulling thread$6 to $15
Hot glue gun and sticksLow-temp mini gun is easier for kids$6 to $15
Hanging hardwareSmall paper clips, screw eyes or eye pins$2 to $5
Printer paper and tapeFor templatesPennies per ornament

A starter set for twelve ornaments usually lands between $25 and $55 if you buy everything new, and much less if you already own the tools.

Choosing the Right Wood Slice

Pick slices 3 to 4 inches across and at least 1/2 inch thick. Thinner rounds split when you hammer and are more likely to let nail points poke through the back. Wider slices give you room for detail, but they get heavy on thin branches.

Hammering nails into a wood slice to start string art ornaments with embroidery floss
Photo : Jaisalmer, India, Art ornaments, Textiles, Fabric — Vyacheslav Argenberg (BY 4.0)

Basswood, Birch or Pine?

  • Basswood: soft and even-grained, so nails go in cleanly. Often the best choice for beginners and kids.
  • Birch: pale, attractive bark and a harder bite. Nails can bend, so start holes with a light tap.
  • Pine: inexpensive and easy to find, though knots and sap can deflect a nail.

Choose dried slices with a fairly flat face. Fresh-cut rounds crack as they dry, which ruins the thread tension later. Sand rough faces lightly with 220-grit paper before you begin.

Nail Size and Depth: Keep Points Off the Back

For a 1/2 inch slice, use 3/4 inch nails and drive each one only about 1/4 inch deep. That leaves roughly 1/2 inch standing for thread and keeps a safe margin before the point reaches the back. Use 1 inch nails only on slices 3/4 inch thick or more.

Hold each nail with needle-nose pliers while you tap it in. This protects your fingers and keeps the nail straight. Aim for matching heights so the floss lies flat across the design.

How to Make Wood Slice Christmas Ornaments With Nails and Thread

If you are wondering how to make wood slice Christmas ornaments that look neat, the secret is a paper template. Here is the full process.

  1. Make the template. Draw or print your shape so it fits inside the slice with a margin of at least 1/2 inch from the bark. Mark a dot where every nail goes.
  2. Cut and tape. Trim the paper to the slice size and tape it down on two sides so it cannot slide.
  3. Hammer through the paper. Start each nail with a gentle tap, then drive it to about 1/4 inch deep. Work around the shape in order.
  4. Tear away the paper. Peel it off gently. Use the pliers to nudge any nail that sits crooked.
  5. Tie on. Cut about 60 inches of floss, separate it into 2 or 3 strands, and knot it tightly around your starting nail.
  6. Wrap. Follow the thread path for your shape, pulling snug at every nail.
  7. Finish. Knot the end around the last nail, add a dot of hot glue to the knot, and trim the tail.
  8. Add the hanger. See the hanging section below.

A tip for even tension: wrap each nail one full turn, then pull toward the next nail at a slight downward angle so the thread sits near the base instead of climbing the nail.

Nail Layouts and Thread Paths for Four Shapes

Use two or three strands of six-strand floss for a clean, slightly bold line. One strand looks delicate but slips easily. These counts are a reliable starting point you can adjust once you see how your slice behaves.

Christmas Tree (about 13 nails)

Place one nail at the top. Arrange the rest in a widening triangular outline: about five nails down each side, stepping outward in three or four tiers, plus two small nails for a trunk. Tie on at the top and zigzag from side to side, one tier at a time, working downward. A single continuous strand can connect every nail, so you do not need a separate length for each branch. Finish by wrapping the outline.

Five-Point Star (10 nails)

A five-point star uses ten nails: five outer tips and five inner corners. Mark the tips first, then place an inner corner between each pair. For the outline, wrap tip, inner corner, tip, around the whole shape. To fill it, run floss from each tip across to the opposite inner corners, creating a crisscross center.

Heart (about 10 nails)

Set one nail at the bottom point, one at the center dip on top, and four nails curving up each side. Outline first by circling the nails. For a filled heart, tie onto the bottom nail and run lines back and forth from the bottom to every side nail, then finish with a final outline wrap.

Snowflake and Bethlehem Star

For a snowflake, use a center nail plus two nails on each of six arms, about 13 nails total. Run floss from center to each arm tip, then connect the inner nails in a hexagon. A Bethlehem star works with eight nails: four long tips (top and bottom longer than the sides) and four inner corners. Outline it, then add a line from the long top tip down through the center for a glowing look.

Wood Slice Christmas Ornaments Ideas and Design Variations

Once you can make the basic shapes, try these wood slice Christmas ornament ideas to customize each batch:

  • Color palettes: classic red and green, white on dark stained wood, or soft blues for a winter look.
  • Metallic thread: gold or silver floss adds shine. It is slippery, so use a double knot at every start.
  • Two-tone shapes: outline in one color and fill in another.
  • Stain or seal first: apply a wood stain or clear spray sealer and let it dry fully before hammering. Sealing after the thread is on can discolor the floss.
  • Custom wood slice Christmas ornaments: write a name or year with a fine-tip paint pen or wood burner on the back, or add a small initial in nails on the front.

A mix of painted details and thread, such as a painted snowy edge around a string art tree, bridges both styles nicely.

String Art Ornaments Patterns Free: How to Create Your Own

You do not need to buy a kit or hunt for string art ornaments patterns free online. Draw any simple outline on graph paper, with one dot at each corner and curve point. Keep shapes bold and symmetrical. Fewer than 15 nails is plenty for a 3 inch slice, and more nails make the project slower without improving the look.

Good beginner shapes include a mitten, a bell, an angel, a candy cane and a letter. Print the template at actual size and test the fit on your slice before cutting.

If you prefer buying, a string art ornament kit usually includes pre-cut wood, nails and floss. It is convenient, but making your own costs less per ornament and lets you choose the wood.

How to Hang String Art Ornaments: Methods Compared

MethodProsCons
Paper clip and hot glueNo drilling, fast, cheapGlue can fail on very smooth or dusty bark
Screw eyeVery secureNeeds a pilot hole; can split thin slices
Drilled hole with ribbonPretty, traditionalNeeds a drill and can crack the slice
Eye pinNeat metal lookNeeds pliers and a small pilot hole

The paper clip method is the easiest. Straighten the outer loop slightly, set the clip on the top back edge, and cover its base with a generous dot of hot glue. Hold it for 30 seconds. Let it cure fully before hanging.

Check the back for rough bark and glue strings. Rough wood can scratch furniture and snag branches, so a small felt dot on the back is a good finishing touch if the ornaments will sit on a table or mantel.

Common Mistakes and How to Fix Them

  • Split wood: the slice was too thin or too dry. Pre-drill tiny pilot holes with a bit slightly narrower than the nail, or switch to a thicker slice.
  • Bent nails: you are hitting too hard or at an angle. Hold with pliers, tap lightly, and straighten gently with the pliers.
  • Thread slipping off: nails are too short or floss is too slippery. Drive nails less deep, or wrap an extra turn at each nail.
  • Nails poking through the back: the nails are too long for the slice. Use shorter nails or thicker wood, and file any points that do appear.
  • Uneven shapes: the template shifted or the dots were not measured. Tape securely and use a ruler.
  • Loose, saggy lines: pull tighter at every nail and keep one hand on the thread while you move to the next.

Safety and Kid-Friendly Tips

Small nails and hammers need adult supervision. Younger children can skip hammering altogether: pre-drill pilot holes or have an adult start the nails, then let the child wrap the thread. Another option is to use flat-head push pins on a softer wood, though the look is different.

Hot glue can cause burns, so use a low-temperature gun and keep fingers away from the nozzle and melted glue. Wear safety glasses while hammering, and keep nails away from toddlers and pets because they are choking and swallowing hazards. The U.S. Consumer Product Safety Commission offers general guidance on small parts and child safety at cpsc.gov. Sweep the work area when you finish, as stray nails are easy to miss.

Batch-Making a Dozen Ornaments

To make twelve ornaments, set up an assembly line. Print twelve templates, tape each to a slice, and hammer them all in one session. Then thread them in a second session, and add hangers in a third. Working in stages keeps tension consistent and cuts the total time.

Cut floss lengths ahead of time and sort the colors into small cups. Plan on about one skein for every three to four ornaments. For a party, set up a station with pre-nailed slices so guests only need to wrap and knot.

For gifting, tuck each ornament into a small kraft box with tissue, or tie two on a twig bundle with twine. A short handwritten tag with the year turns an inexpensive craft into a keepsake. If you enjoy more handmade projects, browse our DIY projects for ideas, find seasonal hosting inspiration in entertaining, or see how to style them in living room holiday displays.

Caring for Your Finished Ornaments

Store string art ornaments flat in a shallow box with tissue between layers, away from damp basements and hot attics. Dust them gently with a soft brush. If a strand loosens, add a dot of glue at the nearest nail and re-tension. Handled kindly, these ornaments can come out of the box year after year. For more seasonal decorating tips, see our lifestyle section.

Frequently Asked Questions

How do you make wood slice Christmas ornaments with string?

Tape a paper template to a wood slice, hammer small nails through the marked dots to about 1/4 inch deep, and tear the paper away. Tie embroidery floss to one nail and wrap it from nail to nail to form your shape. Knot, glue the end, and add a paper clip hanger to the back.

What size nails work best for string art ornaments?

Use 3/4 inch brad nails or small finishing nails for slices at least 1/2 inch thick. Drive them about 1/4 inch deep so the points stay inside the wood. Choose 1 inch nails only for slices around 3/4 inch thick or more, otherwise the tips may poke through the back.

How much do string art Christmas ornaments cost to make?

Expect roughly $1 to $2.50 per ornament when you buy wood slices in a pack, a box of nails and a few skeins of floss. A starter set for twelve ornaments is typically $25 to $55 if you need tools, and less if you already own a hammer, pliers and a glue gun.

Can kids make string art ornaments?

Yes, with supervision. Adults should handle the hammering and hot glue. Younger children can wrap the thread around pre-started nails, which is the fun part. Use safety glasses, keep nails out of reach of toddlers, and consider a low-temp glue gun for the hanger step.

Sources

This guide was inspired by the project in Instead of Painting Wood Slices, She Used Nails and Thread to Make Christmas Ornaments on Homedit. Safety information: U.S. Consumer Product Safety Commission. Embroidery floss reference: DMC. Prices are general estimates and vary by retailer.

White bathroom box molding below a chair rail on the lower walls

Bathroom Box Molding: 7 Stunning Ideas You Will Love

Elegant formal dining room before you convert dining room space into something more useful

Convert Dining Room: 7 Stunning Ideas You Will Love

Leave a Reply