Painted built-in bookshelves in a living room, a billy built-in hack example

Billy Built-In Hack: 7 Beautiful Steps, Impeccable Results

A billy built-in hack turns affordable IKEA BILLY bookcases into shelving that looks like it was custom-built for your home. By adding filler strips, moulding, caulk, and a coat of cabinet-grade paint, you can achieve a high-end built-in look for roughly $350–$700 — compared to $3,000–$8,000 or more for true custom cabinetry on a 10-foot wall. This guide walks through every step, decision point, and common mistake so you can pull off a professional-looking billy built-in hack regardless of your room shape or skill level.

Table of Contents

Table of Contents

Why the Billy Built-In Hack Works So Well

The IKEA BILLY bookcase has been in production for decades, and its simple rectangular profile makes it an ideal candidate for a billy built-in hack. The units come in several widths (15¾”, 23⅝”, and 31½”) and two heights (41¾” and 79½”), so you can mix and match configurations to fill almost any wall. The flat sides sit flush against each other, and the uniform depth means a single run of crown moulding ties everything together across the top.

Painted built-in bookshelves in a living room, a billy built-in hack example
Photo : okchomeseller sur Openverse (BY 2.0)

What makes this billy built-in hack convincing is how trim covers every telltale seam. Filler strips hide gaps between units and walls. Base moulding wraps the bottom to match your room’s existing trim. Crown moulding across the top connects the shelving to the ceiling or a soffit. And a thorough coat of paint — the same color on bookcases, trim, and filler — erases the line between IKEA particleboard and real millwork. The result is a wall of ikea bookcase built ins that most visitors will assume came with the house.

Full Materials List and US Price Ranges

Before starting your billy built-in hack, gather everything you need. Prices below reflect typical US retail ranges at IKEA, Home Depot, and Lowe’s as of recent listings. Your total will depend on wall width and moulding choices.

MaterialEstimated US CostNotes
IKEA BILLY bookcase (79½” tall)$70–$130 eachWidth depends on your wall layout; buy BILLY height extensions if ceiling is above 80″
IKEA BILLY bookcase (41¾” tall)$50–$70 eachUseful as lower cabinets or half-height flanking units
BILLY OXBERG glass or panel doors$35–$65 per pairOptional — adds a cabinetry look to lower sections
MDF filler strips (¼” × 3″ × 8′)$3–$6 eachClose gaps between units and walls; buy extra
Crown moulding (MDF or pine)$1–$3 per linear foot2¼”–3½” profile matches most rooms
Base moulding / baseboard$1–$2 per linear footMatch existing room trim profile if possible
Wood filler (Bondo or DAP Plastic Wood-X)$8–$14 per tubFor nail holes and seams that caulk won’t cover
Paintable caulk (acrylic latex)$4–$7 per tubeUse along wall-to-trim joints; never on shelf-to-shelf seams
Shellac-based primer (Zinsser BIN)$12–$18 per quartSeals raw MDF and IKEA laminate so paint adheres
Cabinet-grade paint (alkyd or hybrid enamel)$40–$60 per gallonBenjamin Moore Advance or Sherwin-Williams Emerald Urethane are popular choices
Brad nails (18-gauge, 1¼”)$5–$8 per boxFor attaching moulding; use a brad nailer or hammer
Construction adhesive (Liquid Nails)$5–$8 per tubeBonds filler strips and moulding to laminate surfaces
Anti-tip wall anchorsIncluded with BILLYNon-negotiable for safety; attach to studs

For a typical 10-foot wall using four or five BILLY units, expect a total billy built-in hack budget of roughly $350–$700, depending on moulding style and paint brand. That is a fraction of what custom cabinetry costs — more on that comparison below.

Step 1: Planning, Measuring, and Choosing the Right BILLY Configuration

Every successful billy built-in hack starts with careful measurement. Measure your wall width, ceiling height, and note the locations of outlets, light switches, vents, and existing baseboards. Sketch the wall to scale on graph paper or use a free tool like IKEA’s online planner.

Painted built-in bookshelves in a historic 1916 Alaska heritage house
Photo : Bernt Rostad sur Openverse (BY 2.0)

Choose BILLY widths that fill the wall with the smallest remaining gaps. A combination of one 31½” unit and two 23⅝” units covers about 79 inches, which leaves manageable filler gaps on a wall roughly 80 to 84 inches wide. On a full 10-foot (120-inch) wall, five 23⅝” units cover about 118 inches and leave just an inch or so per side. For narrower walls or flanking a doorway, the 15¾” BILLY is useful. Decide whether to add OXBERG doors on the lower half for a diy built-in bookcase with cabinets look.

Measure your ceiling height. Standard BILLY units are 79½” tall. If your ceiling is 96 inches, you will have a 16½” gap to close with crown moulding and a filler board or a BILLY height extension. If your ceiling is lower — common in older homes — you may need to trim the top of the units. This billy built-in hack works with ceilings from about 84″ to 108″ without major structural changes.

Difficulty: Beginner. Time: 1–2 hours for planning.

Step 2: Assembling and Positioning the BILLY Units

Assemble each BILLY bookcase according to IKEA’s instructions. A few tips specific to the billy built-in hack: leave the back panel slightly loose until the unit is upright and positioned, because you may need to adjust it for plumb. If your floor is uneven, use shims under the base — the filler strips and base moulding will hide them later.

Slide the units into position along the wall. Push them tight against each other side-by-side. If you removed your existing baseboard before starting, the units can sit directly against the wall. If the baseboard stays, you have two choices: notch the back bottom of each BILLY to fit over the baseboard, or raise the units on a simple plywood riser that brings the BILLY face flush with the baseboard. Many people doing a billy built-in hack prefer the riser approach because it creates a deeper, more substantial base and avoids weakening the BILLY’s back panel.

Use clamps or screws to fasten the BILLY units to each other through the side panels. Pre-drill to avoid splitting the particleboard. This step keeps the units from separating over time and is essential for making ikea bookcase built ins feel like a single piece of furniture.

Difficulty: Beginner. Time: 2–3 hours for three to four units.

Step 3: Anchoring to Wall Studs for Safety

This is the most important safety step in any billy built-in hack. BILLY bookcases are tall, relatively shallow, and made of particleboard — they can tip forward, especially if children climb them or heavy items sit on upper shelves. IKEA includes anti-tip hardware with every unit. Use it.

Basement office with open doors showing built-in storage cabinetry and shelving
Photo : AdamSelwood sur Openverse (BY 2.0)

Locate the wall studs with a stud finder. Drill through the BILLY’s rear rail (the horizontal piece at the top back) and drive a screw directly into a stud. Each BILLY unit should have at least one anchor point into a stud. If a stud does not line up, use a toggle bolt rated for your wall type, but stud anchoring is always preferred. For homes with small children, consider adding a second anchor point lower on the unit. Never skip this step — an unanchored tall bookcase is a serious hazard.

Difficulty: Beginner. Time: 30–45 minutes.

Step 4: Cutting and Installing Filler Strips to Close Gaps

Gaps between the outermost BILLY units and the walls are what make the whole assembly look like freestanding furniture instead of a billy built-in hack. Filler strips eliminate those gaps and create the illusion that the shelving is part of the wall itself.

Measure the gap between the side of each end unit and the adjacent wall at several points — top, middle, and bottom. Walls are rarely perfectly plumb, so the gap will likely vary. Rip MDF strips to the widest measurement on a table saw, then scribe and plane or sand the wall-side edge to follow the wall’s contour. If you do not own a table saw, many Home Depot and Lowe’s locations will rip MDF to width for you at the cutting station.

Apply construction adhesive to the back of each filler strip and press it into place. Use brad nails or painter’s tape to hold it while the adhesive sets. For gaps between individual BILLY units (usually very small, under ¼”), a bead of caulk is enough. For the billy built-in hack to look convincing, the filler strips need to sit flush with the bookcase face — sand or shim as needed.

If you are working with a wall that has a noticeable bow, do not try to force a rigid strip to follow the curve. Instead, use two thinner strips laminated together, which flex more easily. Fill any remaining micro-gaps with caulk after painting.

Difficulty: Intermediate. Time: 2–3 hours.

Step 5: Installing Base Trim and Moulding

Base moulding across the bottom of the BILLY units ties your billy built-in hack to the rest of the room’s trim work. Ideally, match the profile of your existing baseboards so the shelving looks original to the house.

Finished white painted built-in bookshelves styled with books and baskets in a living room
Photo : okchomeseller sur Openverse (BY 2.0)

If you built a plywood riser in Step 2, the base moulding wraps around the riser’s face and returns into the wall on each side. If the BILLY units sit directly on the floor, attach the base moulding to the front face of the bottom rail. Use construction adhesive and brad nails. A miter saw gives the cleanest corner cuts, but a manual miter box works for simple 90-degree returns.

For a diy built-in bookcase that looks truly custom, add a face frame. This is a flat piece of MDF or poplar (1×2 or 1×3) glued and nailed to the front edges of each BILLY unit, covering the raw particleboard edges. Face frames add about $15–$30 in lumber for a typical wall and an extra hour of work, but they significantly improve the finished look and give you a wider nailing surface for the crown moulding above.

Difficulty: Intermediate (miter cuts required). Time: 2–3 hours.

Step 6: Adding Crown Moulding for a Seamless Finish

Crown moulding is what transforms your billy built-in hack from “nice shelves” to “those look like they cost thousands.” The moulding bridges the gap between the top of the BILLY units and the ceiling, giving the eye a finished line that reads as architectural millwork.

Choose a crown profile that matches or complements your room’s existing crown (if any). For rooms without ceiling moulding, a simple 2¼” ogee or cove profile works well. For taller gaps between the BILLY top and the ceiling, stack moulding: a flat board across the top, then crown above it, creates a built-up cornice that fills more vertical space.

Cut crown moulding with a miter saw set to compound angles. This is the trickiest cut in the entire billy built-in hack. If you are not comfortable with compound miters, a coping saw lets you cope the inside corners instead — slower, but more forgiving. Practice on scrap pieces before cutting your finished moulding.

Attach the crown to a nailer board screwed to the top of the BILLY units (not directly to the ceiling, unless the shelving runs wall-to-wall and you are certain the ceiling is level). Use construction adhesive plus brad nails. If the ceiling is not level, scribe the top edge of the crown to follow the ceiling line, then caulk the remaining hairline gap.

Difficulty: Intermediate to advanced (compound miter cuts). Time: 2–4 hours.

Step 7: Caulking and Painting for a Factory-Smooth Billy Built-In Hack

This final step is where the billy built-in hack goes from “assembled parts” to “built-in shelving.” Caulking and painting take the most patience, but they deliver the biggest visual payoff.

Caulking

Apply paintable acrylic latex caulk to every joint where trim meets wall, where filler strips meet the BILLY sides, and where crown meets ceiling. Use a wet finger or a caulk-smoothing tool to create a clean, concave bead. Do not caulk joints between shelves and uprights inside the bookcase — those should be filled with wood filler and sanded smooth so they look like solid wood, not flexible caulk.

A common mistake in a billy built-in hack is using silicone caulk. Silicone does not accept paint. Always use paintable acrylic latex caulk at every visible joint that will be painted.

Priming — Do Not Skip This

IKEA BILLY surfaces are either raw particleboard (inside edges), foil-wrapped laminate (shelf faces), or raw MDF (your filler strips and moulding). Standard latex primer cannot reliably bond to laminate, and it lets MDF soak up paint unevenly. Use a shellac-based primer like Zinsser B-I-N on all surfaces. It sticks to laminate, seals MDF, and dries in about 45 minutes. One coat is usually enough.

Lightly sand the primed surfaces with 220-grit sandpaper to knock down any nibs before topcoating. This step is what separates a good billy built-in hack from a great one.

Painting

Standard wall paint (flat or eggshell latex) is too soft for shelving. Books, bookends, and décor will scuff and chip it within months. Use a cabinet-grade paint instead. Benjamin Moore Advance (waterborne alkyd) is widely recommended for this billy built-in hack because it levels beautifully, cures to a hard shell, and cleans up with water. Sherwin-Williams Emerald Urethane Trim Enamel is another strong choice.

Apply two coats with a high-density foam roller (4″ or 6″) for large surfaces and a good-quality angled brush for moulding details. Roll in one direction to minimize roller marks. Allow the manufacturer’s recommended dry time between coats — usually 16–24 hours for waterborne alkyds. Do not rush this. The curing process takes the paint from tacky to rock-hard over about two weeks, so avoid loading the shelves with heavy items for at least a few days after the final coat.

Color guidance: White, off-white, and soft gray are the most popular choices for a billy built-in hack because they mimic the look of traditional painted millwork. Matching the trim color in your room (usually some shade of white) is the safest bet. Bold accent colors — navy, forest green, charcoal — can look striking but require flawless prep because imperfections show more on dark, glossy surfaces.

Difficulty: Beginner to intermediate. Time: 4–6 hours of active work, plus 24–48 hours of dry time between coats.

Total Time and Difficulty Summary for This Billy Built-In Hack

Expect to spend roughly 12–20 hours of active work spread over a weekend plus one or two evenings for additional paint coats. The project breaks down like this:

  • Planning and measuring: 1–2 hours (beginner)
  • Assembly and positioning: 2–3 hours (beginner)
  • Wall anchoring: 30–45 minutes (beginner)
  • Filler strips: 2–3 hours (intermediate)
  • Base and face trim: 2–3 hours (intermediate)
  • Crown moulding: 2–4 hours (intermediate–advanced)
  • Caulk, prime, paint: 4–6 hours active, plus dry time (beginner–intermediate)

The biggest time variable is the moulding work. If you have a power miter saw and some experience with trim, Steps 5 and 6 go quickly. If you are using a hand miter box and coping saw, add an extra hour or two. Neither approach is wrong — the coping saw is just slower.

Tools You Will Need for This Billy Built-In Hack

  • Tape measure and level (4-foot level preferred)
  • Stud finder
  • Drill/driver with drill bits and screwdriver bits
  • Miter saw or hand miter box with coping saw
  • Brad nailer or hammer with nail set
  • Table saw or circular saw (for ripping filler strips — or have them cut at the store)
  • Caulk gun
  • 220-grit sandpaper
  • High-density foam rollers (4″–6″) and angled brush
  • Painter’s tape
  • Clamps (bar clamps or spring clamps)

Common Mistakes to Avoid with a Billy Built-In Hack

These are the errors that trip up the most people attempting a billy built-in hack. Avoiding them will save you hours of rework.

Not Accounting for Baseboard Height

If you plan to keep your existing baseboards in place, you must account for their height and depth when positioning the BILLY units. Forgetting this means the bookcases sit too far from the wall and the base moulding does not line up. Measure your baseboards before ordering materials.

Skipping the Anti-Tip Wall Anchor

Anchoring is not optional. An 80-inch-tall particleboard bookcase loaded with books can weigh over 200 pounds. Without anchoring to studs, it is a tipping hazard — especially dangerous in homes with children. Always anchor every unit as part of your billy built-in hack.

Using the Wrong Caulk

Silicone caulk is waterproof but unpaintable. Use paintable acrylic latex caulk for every visible joint in your billy built-in hack. Save silicone for bathrooms and kitchens where water resistance matters more than appearance.

Painting Raw MDF Without Shellac Primer

MDF is extremely porous. Standard latex primer soaks into the fibers and raises the grain, leaving a rough, blotchy surface. Shellac-based primer (like Zinsser B-I-N) seals the MDF in one coat and gives you a smooth base for your topcoat. Skipping this step is the single most common reason a billy built-in hack looks “homemade” instead of custom.

Choosing the Wrong BILLY Depth

Standard BILLY bookcases are 11 inches deep (28 cm). The narrow version is about 6¼ inches deep. In a small hallway or a room where the shelving flanks a door, the standard depth may protrude too far. Measure the space carefully and consider whether the 15¾-inch-wide narrow-depth BILLY works better for your layout.

Variation Guides: Adapting the Billy Built-In Hack to Any Room

Sloped or Vaulted Ceilings

For rooms with sloped ceilings, the crown moulding at the top of your billy built-in hack needs to follow the ceiling angle rather than run level. Use a bevel gauge to capture the ceiling slope, then scribe and cut the top of a filler board to match the angle. Install the crown moulding against this angled board. The result is a clean, raked line that follows the ceiling — a detail that makes the built-in look intentional rather than forced.

Flanking a Doorway or Fireplace

One of the most dramatic uses of a billy built-in hack is flanking a doorway or fireplace with matching shelving. For doorways, use identical BILLY units on each side. Above the door, connect them with a horizontal bridge shelf or a simple header board wrapped in the same moulding. For fireplaces, the approach is similar, but pay attention to clearance — keep combustible materials (MDF, particleboard) at least 12 inches from a firebox opening, or follow your local fire code. A diy built-in bookcase around fireplace is a high-impact project, but heat and clearance requirements deserve careful attention.

Small or Narrow Spaces

In tight spaces — a narrow hallway, a nook beside a closet, or a wall that is only 4–5 feet wide — use the smaller BILLY units (15¾” wide or the shallow-depth version). Two narrow BILLYs with wide filler strips on each side can fill a 40-inch alcove and still deliver the full billy built-in hack effect. Alcoves and nooks are actually the easiest spots for this project because the side walls do most of the “framing” work for you.

DIY Built-In Bookcase: Finish and Paint Guidance

The difference between a billy built-in hack that looks like painted IKEA furniture and one that looks like custom millwork often comes down to the paint. Here is what to know about choosing and applying the right finish.

Alkyd vs. latex: Traditional oil-based (alkyd) paint gives the hardest, smoothest finish, but it has strong fumes and long dry times. Waterborne alkyd hybrids — Benjamin Moore Advance is the best-known — offer similar hardness with easier cleanup and lower odor. Standard latex wall paint is too soft for shelving and will chip at edges.

Roller vs. spray: A professional spray finish is the gold standard, but most homeowners doing a billy built-in hack do not have spray equipment or a dust-free space. A high-density foam roller gives excellent results if you use thin coats and roll in one direction. Avoid fluffy roller covers — they leave texture. A 4-inch foam roller handles the shelf interiors; a small angled brush handles moulding profiles.

Sheen: Semi-gloss is traditional for trim and built-ins because it is durable and easy to clean. Satin is slightly less shiny and hides imperfections better — a good compromise for a billy built-in hack where the surfaces are particleboard rather than solid wood.

Cost Comparison: Billy Built-In Hack vs. Alternatives

The cost advantage of a billy built-in hack becomes clear when you compare it to the alternatives for a standard 10-foot wall.

OptionEstimated Cost (10-ft wall)Time to CompleteCustomizationDurability
Billy built-in hack (DIY)$350–$7001–2 weekendsModerate (limited by BILLY sizes)Good with proper paint/anchoring
Flat-pack built-in kits$800–$2,0001–2 weekendsModerate (fixed configurations)Good (engineered wood)
Hiring a carpenter (custom)$3,000–$8,000+1–3 weeksUnlimitedExcellent (solid wood/plywood)

The billy built-in hack delivers roughly 80% of the visual impact at 10–20% of the cost of custom work. The trade-off is durability — particleboard is less forgiving than plywood or solid hardwood if it takes water damage or heavy abuse. For most living rooms, offices, and bedrooms, that trade-off is well worth it.

Maintenance and Long-Term Durability

A well-executed billy built-in hack will look great for years, but particleboard does have limitations. Here is how to keep your built-ins in good shape.

Water damage: Particleboard swells and crumbles when it absorbs water. If a shelf gets wet — from a spilled vase, a leaking window, or condensation — dry it immediately and thoroughly. If swelling occurs, the damaged section cannot be reversed. Cut out and replace the affected panel, or cover it with a thin layer of wood filler and repaint. Prevention is better: keep plants in waterproof trays and fix any nearby leaks promptly.

Sagging shelves: BILLY shelves can sag over time under heavy loads, especially the wider (31½”) version. A simple fix is adding a center support — a vertical MDF strip glued and pinned under the shelf at its midpoint. For shelves holding dense items like textbooks, move heavy items to lower shelves or distribute weight evenly. This is a known limitation of the billy built-in hack that proper load management easily addresses.

Moving and disassembly: One advantage of a billy built-in hack over true custom built-ins: if you move, you can take them with you. Remove the crown moulding and base moulding carefully (a thin pry bar and patience), unscrew the wall anchors, and separate the units. The filler strips and caulk will not survive disassembly, but the BILLY units themselves can be reassembled in a new home with fresh trim. Budget for new moulding, filler, and paint at the new location.

For more ideas on organizing shelving and storage throughout your home, explore our guides on home organization and living room projects.

Turning IKEA Bookcases into Built-Ins: Which BILLY Is Best?

IKEA currently offers the BILLY bookcase in several configurations. For a billy built-in hack, the most popular options are:

  • BILLY 31½” × 79½” (wide, tall): Best for open walls where you want fewer units and wider shelf spans. Pair with OXBERG doors on the bottom two shelves for a diy built-in bookcase with cabinets look.
  • BILLY 23⅝” × 79½” (medium, tall): The most versatile size. Three of these fill a 72-inch wall with minimal filler needed. This is the workhorse unit for most billy built-in hack projects.
  • BILLY 15¾” × 79½” (narrow, tall): Ideal for flanking doorways, filling alcoves, or fitting into tight spots. Also available in a shallow depth.
  • BILLY 23⅝” × 41¾” (medium, short): Useful as a lower cabinet below a window or as the base of a stacked configuration with open shelving on top.

If you are planning a diy built-in bookcase around window layout, combine two tall narrow BILLY units on each side of the window with a short BILLY or a simple MDF shelf below the sill to bridge the gap. This billy built-in hack variation creates a classic library window seat look.

Real-Life Example: A 10-Foot Living Room Wall on a Budget

Picture a homeowner with a blank 10-foot (120-inch) living room wall, an 8-foot ceiling, and a vision for floor-to-ceiling built-in shelving. Custom quotes from two local carpenters came in at $5,500 and $7,200 — well beyond the project budget. Instead, they attempted a billy built-in hack using five BILLY 23⅝” bookcases (79½” tall). Side by side the five units span about 118 inches, leaving roughly an inch per side for filler strips. OXBERG panel doors covered the lower section of each unit. Because the units top out at 79½” and the ceiling sits at 96″, a flat MDF board topped with crown moulding closed the remaining 16½” gap as a built-up cornice.

The five BILLY units and doors cost about $500 total. Moulding, MDF filler strips, primer, and a gallon of Benjamin Moore Advance in Simply White brought materials to roughly $640. The project took a full weekend: Saturday for assembly, anchoring, and filler strips; Sunday for moulding, caulk, and the first coat of primer. Two evenings the following week handled the two topcoats of paint.

The finished wall looks like built-in cabinetry that came with the house. The only giveaway, if you look closely, is the adjustable shelf pin holes inside the units — but those are hidden behind books and décor. The total cost came to under $650, saving roughly $4,850–$6,550 compared to the custom quotes. The lesson: a systematic billy built-in hack, done patiently with proper materials, delivers a result that rivals work costing ten times more.

Frequently Asked Questions

How Much Do Built-In Bookshelves Cost?

True custom built-in bookshelves typically cost $3,000–$8,000 or more for a 10-foot wall, depending on materials, complexity, and labor rates in your area. A billy built-in hack delivers a similar look for $350–$700 in materials, with the labor being your own time. The savings come from using IKEA’s mass-produced bookcases as the structural core and adding trim and paint to create the custom appearance.

How to Make IKEA Bookcase Look Built In?

The key steps are: close all gaps between units and walls with MDF filler strips, add base moulding that matches your room’s existing trim, install crown moulding across the top to connect the shelving to the ceiling, caulk every seam, and paint everything — bookcases, trim, and fillers — a single color with cabinet-grade paint. The uniform color and continuous moulding lines are what make a billy built-in hack read as custom millwork.

Is IKEA BILLY Discontinued?

As of this writing, the IKEA BILLY bookcase remains in production and is one of IKEA’s best-selling product lines. IKEA occasionally updates finishes, dimensions, or accessories, so check the current IKEA catalog or website for the latest configurations before starting your billy built-in hack. Availability can vary by store location.

How Deep Should a Built-In Bookcase Be?

Standard built-in bookshelves are 10–12 inches deep, which accommodates most books and decorative objects. The standard BILLY bookcase is 11 inches deep (28 cm), making it a natural fit. In hallways or narrow rooms, the shallow-depth BILLY at about 6¼ inches works for paperbacks and small décor but will not hold larger hardcovers or binders.

Can You Disassemble IKEA BILLY Bookcase?

Yes. BILLY bookcases use cam-lock fasteners and dowels that can be disassembled and reassembled. In a billy built-in hack, the trim, caulk, and filler strips are the parts that will not survive disassembly — plan to purchase new trim materials if you move the units to a new home. The BILLY units themselves hold up well through one or two disassembly cycles.

Best DIY Built-In Bookshelves: Final Checklist

Before you call your billy built-in hack complete, run through this list:

  • Every BILLY unit is anchored to at least one wall stud
  • All gaps between units and walls are filled with MDF strips
  • Base moulding matches (or closely complements) existing room trim
  • Crown moulding runs continuously across the top, tight to the ceiling
  • All nail holes are filled with wood filler and sanded smooth
  • All wall-to-trim joints are caulked with paintable acrylic caulk
  • Every surface has been primed with shellac-based primer
  • Two coats of cabinet-grade paint have been applied and allowed to cure
  • Shelves are loaded gradually over the first week to let paint fully harden

If everything checks out, you have a wall of built-in shelving that looks like it belongs in an interior design magazine — at a price that left your budget intact. For additional inspiration on furnishing and styling your shelves, browse our furniture and décor ideas.

Sources: This project guide was inspired by the IKEA BILLY Built-In Hack tutorial on House Full Life. Product references include Benjamin Moore Advance and Zinsser B-I-N Shellac-Based Primer.

A diy lazy susan two-tier server, a tiered turntable for home kitchen use

DIY Lazy Susan: 6 Stunning Steps Your Kitchen Will Love

LED string light close-up, suitable for a hanging fairy lights wall display.

Hanging Fairy Lights Wall: 7 Stunning Steps Renters Love

Leave a Reply